Cisco Meraki CW9162

• 2.4 GHz 802.11b/g/n/ax client access radio 
• 5 GHz 802.11a/n/ac/ax client access radio 
• 6 GHz 802.11ax client access radio 
• 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio 
• 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios 

• Integrated omni-directional antennas 
  • 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  • 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
  • 6 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

• UL/DL-OFDMA
• Target Wait Time (TWT)
• BSS coloring*
• SU-MIMO and DL MU-MIMO support 
• Maximal ratio combining (MRC)
• 802.11ax beamforming 
• 20 and 40 MHz* channels (802.11n)
• 20, 40*, 80 MHz channels (802.11ac Wave 2)
• 20, 40*, 80 and 160MHz channels (802.11ax) 

Note: *40MHz channels are supported only in 5 & 6 GHz bands.

• Up to 1024-QAM on 2.4 GHz, 5 GHz and 6 GHz bands 
• Packet aggregation – A-MPDU (transmit and receive), A-MSDU (transmit and receive)

• Power over Ethernet: 37 – 42.5 V (802.3at compliant)
• DC Power Adapter (12V)
• Power consumption: Up to 30W
• Minimum power requirement: 30W (802.3at complaint) 
• Power over Ethernet injector and DC adapter sold separately

Actual power consumption may vary depending on the AP usage

• 1x 100/1000/2.5G BASE-T Ethernet (RJ45)
• 1x DC power connector (5.5 mm, center positive)
• USB 2.0 at 4.5W (with 802.3at power)

• Console – Only available in DNA Mode

• All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included)
• Desktop, ceiling, and wall mount capable 
• Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes 

• Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
• Kensington lock

• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
• Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m)
• Operating temperature: 32° to 122°F (0° to 50°C)
• Operating humidity: 10% to 90% (non-condensing)
• Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)

• 2,370,107 hrs at 77°F (25°C) operating temperature
• 991,862 hrs at 113°F (45°C) operating temperature

• 7.8 x 7.8 x 1.7 in. (200 x 200 x 44.45 mm)  
• Weight: 2.05 lb. (0.93 kg)

• Integrated Layer 7 firewall with mobile device policy management 
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal 
• Flexible guest access with device isolation 
• VLAN tagging (802.1q) and tunneling with IPsec VPN 
• PCI compliance reporting 
• WPA2-PSK, WPA2-Enterprise, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)
• EAP Local Authentication – EAP-TTLS/PAP/ PEAP-GTC, EAP-TLS
• AES encryption 
• Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration 
• Cisco ISE integration for Guest access and BYOD Posturing

• Advanced Power Save (U-APSD) 
• WMM Access Categories with DSCP and 802.1p support 
• Layer 7 application traffic identification and shaping

• PMK, OKC, & 802.11r for fast Layer 2 roaming 
• Distributed or centralized layer 3 roaming

• Embedded location analytics reporting and device tracking 
• Global L7 traffic analytics reporting per network, per device, & per application

• One power/booting/firmware upgrade status

• RoHS
• For additional country-specific regulatory information, please contact Meraki sales

• Indoor access point 
• Lifetime hardware warranty with advanced replacement included

• CW9162I-MR: Catalyst CW9162I Cloud Managed 802.11ax Compatible AP 
• MA-PWR-30W-XX: Meraki AC Adapter for MR Series 
• MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)
• Cisco AIR-PWRINJ-6 802.3at
• Cisco AIR-PWRINJ-7 802.3bt
• Cisco AIR-PWRINJ-6 802.3at power cord – MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector
• Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled)
• Meraki access point license required