Cisco Meraki MR28

• 2.4 GHz 802.11b/g/n/ax client access radio 
• 2.4 GHz Bluetooth® Low Energy (BLE 5) radio with Beacon and BLE scanning support
• 5 GHz 802.11a/n/ac/ax client access radio 
• Supported frequency bands (country-specific restrictions apply)
• Supported frequency bands (country-specific restrictions apply):
  • 2.412 – 2.484 GHz 
  • 5.150 – 5.250 GHz (UNII-1) 
  • 5.250 – 5.350 GHZ (UNII-2A) 
  • 5.490 – 5.730 GHz (UNII-2C) 
  • 5.735 – 5.825 GHz (UNII-3) 

• Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) 

• DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring** 
• 2 x 2 multiple input, multiple output (MIMO) with two spatial streams 
• SU-MIMO, UL MU-MIMO** and DL MU-MIMO support 
• Maximal ratio combining (MRC) & beamforming 
• 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax) 

Note: *40MHz channels are supported only in the 5GHz band.

• Up to 1024-QAM on both 2.4 GHz & 5 GHz bands 
• Packet aggregation 

• Power over Ethernet: 37 – 57 V (802.3af compatible)
• Power consumption: 15W max (802.3af).  Note: actual power consumption may vary depending on the AP usage.
• Power over Ethernet injector sold separately 

Note: Actual power consumption may vary depending on the AP usage.

• 1x 10/100/1000 BASE-T Ethernet (RJ45) 

• Two security screw options (included) (10 mm long and 2.5 mm diameter and 4.7 mm head) 
• Concealed mount plate with anti-tamper cable bay

• Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) 
• Humidity: 5 to 95% non-condensing 
• Operating altitude: Up to 40,000 feet (12,192 meters)

• Mean Time Between Failure (MTBF): 257,215hrs at +25°C operating temperature

• 7.95” x 4.88” x 1.02” (202 mm x 124 mm x 25.8 mm), not including deskmount feet or mount plate
• Weight: 9.6 oz (272 g)

• Integrated Layer 7 firewall with mobile device policy management 
• WIDS/WIPS with alerting and rogue AP detection with Air Marshal (performed opportunistically with best-effort on client-serving radios)
• Flexible guest access with device isolation 
• VLAN tagging (802.1q) and tunneling with IPsec VPN 
• PCI compliance reporting 
• WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)**
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM 
• TKIP and AES encryption 
• Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration 
• Cisco ISE integration for Guest access and BYOD Posturing 

• Advanced Power Save (U-APSD) 
• WMM Access Categories with DSCP and 802.1p support 
• Layer 7 application traffic identification and shaping 

• PMK, OKC, & 802.11r for fast Layer 2 roaming 
• Distributed or centralized layer 3 roaming

• Embedded location analytics reporting and device tracking 
• Global L7 traffic analytics reporting per network, per device, & per application

• 1 power/booting/firmware upgrade status 

• RoHS
• For additional country-specific regulatory information, please contact Meraki sales

• Indoor access point
• Lifetime hardware warranty with advanced replacement included

• MR28-HW: Meraki MR28 Cloud Managed 802.11ax AP 
• MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included)
• MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)
• Note: Meraki access point license required.