Cisco Meraki CW9166D1

• 2.4 GHz 802.11b/g/n/ax client access radio 
• 5 GHz 802.11a/n/ac/ax client access radio 
• 6 GHz 802.11ax client access radio 
• 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio 
• 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios 

• CW9166I
  • 2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth
  • 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
  • 5 GHz: (XOR) Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
  • 6 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
• CW9166D1
  • 2.4 GHz: Peak gain 6 dBi, directional antenna, (70×70)
  • 5 GHz: Peak gain 6 dBi, directional antenna, (70×70)
  • 5 GHz (XOR): Peak gain 8 dBi, directional antenna, (60×60)
  • 6 GHz: Peak gain 8 dBi, directional antenna, (60×60)

• UL/DL-OFDMA
• Target Wait Time (TWT)
• BSS coloring*
• SU-MIMO and DL MU-MIMO support 
• Maximal ratio combining (MRC)
• 802.11ax beamforming 
• 20 and 40 MHz* channels (802.11n)
• 20, 40*, 80 MHz channels (802.11ac Wave 2)
• 20, 40*, 80 and 160MHz channels (802.11ax) 

Note: *40MHz channels are supported only in 5 & 6 GHz bands.

• Up to 1024-QAM on 2.4 GHz, 5 GHz and 6 GHz bands 
• Packet aggregation – A-MPDU (transmit and receive), A-MSDU (transmit and receive)

• Power over Ethernet: 42.5 – 57 V (PoE+ and UPoE compliant)
• DC Power Adapter (54V)
• Power requirement USB: Up to 30.5W (UPOE)
• Power requirement No USB: Up to 25W (PoE+)
• Power over Ethernet injector and DC adapter sold separately

Actual power consumption may vary depending on the AP usage

CW9166D1

It is recommended that you ensure that LLDP is enabled to allow proper power negotiation

802.3af PoE is not supported

• 1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45)
• 1x DC power connector (8 mm, center positive)
• USB 2.0 at 4.5W

• Console – Only available in DNA Mode
• Environmental Interfaces – Only available in DNA Mode

• All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included)
• Articulating Arm (CW-MNT-ART2-00 optional)
• Desktop, ceiling, wall, and pole mount capable 
• Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes 

• Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
• Kensington lock

• CW9166I
  • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  • Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m)
  • Operating temperature: 32° to 122°F (0° to 50°C)
  • Operating humidity: 10% to 90% (non-condensing)
  • Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m)
• CW9166D1
  •  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  • Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m)
  • Operating temperature: -4° to 122°F (-20° to 50°C)
  • Operating humidity: 10% to 90% (noncondensing)
  • Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)

• 1,128,980 hrs at 77°F (25°C) operating temperature
• 289,596 hrs at 122°F (50°C) operating temperature

• CW9166I
  • 9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm)  
  • Weight: 3.54 lb. (1.60 kg)
• CW9166D1
  • 9.5 x 9.5 x 2.28 in (241.3 x 241.3 x 57.9 mm)
  • Weight: 3.50 lb (1.59 kg)

• Integrated Layer 7 firewall with mobile device policy management 
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal 
• Flexible guest access with device isolation 
• VLAN tagging (802.1q) and tunneling with IPsec VPN 
• PCI compliance reporting 
• WPA2-PSK, WPA2-Enterprise, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)
• EAP Local authentication – EAP-TTLS/PAP, PEAP-GTC, EAP-TLS
•  Advanced Encryption Standard (AES)
• Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration 
• Cisco ISE integration for Guest access and BYOD Posturing

• Advanced Power Save (U-APSD) 
• WMM Access Categories with DSCP and 802.1p support 
• Layer 7 application traffic identification and shaping

• PMK, OKC, & 802.11r for fast Layer 2 roaming 
• Distributed or centralized layer 3 roaming

• Embedded location analytics reporting and device tracking 
• Global L7 traffic analytics reporting per network, per device, & per application

• One power/booting/firmware upgrade status

• RoHS
• For additional country-specific regulatory information, please contact Meraki sales

• Indoor access point
• Lifetime hardware warranty with advanced replacement included

• CW9166I-MR: Meraki CW9166I Cloud Managed Omnidirectional 802.11ax Compatible AP 
• CW9166D1-MR: Meraki CW9166I Cloud Managed Directional 802.11ax Compatible AP 
• MA-PWR-50WAC: Meraki AC Adapter for MR Series (power cable separate SKU)
• MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)
• Cisco AIR-PWRINJ-6 802.3at
• Cisco AIR-PWRINJ-7 802.3bt

Power cord – MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector

• Mounting bracket:
  • CW9166I: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled)
  • CW9166ID1: AIR-AP-BRACKET-2(bundled)
• Articulating Arm: CW-MNT-ART2-00
• Meraki access point license required