Cisco Meraki MR86

• 2.4 GHz 802.11b/g/n/ax client access radio 
• 5 GHz 802.11a/n/ac/ax client access radio 
• 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
• 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
• Concurrent operation of all four radios 
• Supported frequency bands (country-specific restrictions apply):
  • 2.401 – 2.484 GHz
  • 5.150 – 5.250 GHz (UNII-1)
  • 5.250-5.350 GHZ (UNII-2A)
  • 5.490 – 5.730 GHz (UNII-2C)
  • 5.735 – 5.825 GHz (UNII-3)

• List of compatible antennas: MA-ANT-20/25/27 and AIR-ANT2513P4M-N=

Antenna are not included, please see “Ordering Information”

• DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring** 
• 4 x 4 multiple input, multiple output (MIMO) with four spatial streams 
• SU-MIMO, UL MU-MIMO** and DL MU-MIMO support 
• Maximal ratio combining (MRC) & beamforming 
• 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax)

Note: *40MHz channels are supported only in the 5GHz band.

• Up to 1024-QAM on both 2.4 GHz & 5 GHz bands 
• Packet aggregation 

• Power over Ethernet: 42.5 – 57 V (802.3at compatible)
• Power consumption: 30W max (802.3at required)
• Power over Ethernet injector sold separately

Note: Actual power consumption may vary depending on the AP usage.

• 1x 100/1000/2.5G BASE-T Ethernet (RJ45) 

• All standard mounting hardware included 
• Mounts to walls and vertical poles.

• Two security screws
• Concealed mount plate with anti-tamper cable bay

• Operating and storage temperature: -40 °F to 131 °F (-40 °C to 55 °C) 
• Operating and storage humidity: 5 to 95% non-condensing
• Operating and storage altitude: Up to 40,000 feet (12,192 meters)
• IP67 Environmental rating

• Mean Time Between Failure (MTBF): 1,566,656hrs at +25°C operating temperature

• 11.81” x 6.02” x 2.16” (30.0 cm X 15.3 cm X 5.5 cm), not including cable gland, mounts or antennas
• Weight: 1.5 kg

• Integrated Layer 7 firewall with mobile device policy management 
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal 
• Flexible guest access with device isolation 
• VLAN tagging (802.1q) and tunneling with IPsec VPN 
• PCI compliance reporting 
• WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal**, WPA3 – Enterprise**, WPA3 – Enhanced Open (OWE)**
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM 
• TKIP and AES encryption 
• Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration 
• Cisco ISE integration for Guest access and BYOD Posturing 

• Advanced Power Save (U-APSD) 
• WMM Access Categories with DSCP and 802.1p support 
• Layer 7 application traffic identification and shaping 

• PMK, OKC, & 802.11r for fast Layer 2 roaming 
• Distributed or centralized layer 3 roaming

• Embedded location analytics reporting and device tracking 
• Global L7 traffic analytics reporting per network, per device, & per application

• 1 power/booting/firmware upgrade status 

• RoHS
• For additional country-specific regulatory information, please contact Meraki sales

• Outdoor access point
• 1 year hardware warranty with advanced replacement included

• MR86-HW: Meraki MR86 Cloud Managed 802.11ax AP 
• MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included)
• MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)
• MA-ANT-20 Meraki Dual-Band Omni Antennas 
• MA-ANT-25 Meraki Dual-Band Patch Antenna 
• MA-ANT-27 Meraki Dual-Band Sector Antenna 
• AIR-ANT2513P4M-N= Dual-band, 4-port, 30° beam
• For AIR-ANT2513P4M-N= antenna, contact Cisco directly
• Note: Meraki access point license required.