Cisco Meraki MR57

• 2.4 GHz 802.11b/g/n/ax client access radio 
• 5 GHz 802.11a/n/ac/ax client access radio 
• 6 GHz 802.11ax client access radio 
• 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio 
• 2.4 GHz Bluetooth Low Energy radio with beacon and scanning support concurrent operation of all five radios 

• Integrated omni-directional antennas (4.5 dBi gain at 2.4 GHz, 5.5 dBi gain at 5 GHz, and 5.5 dBi gain at 6GHz)

• DL-OFDMA, TWT support, BSS coloring*
• 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 6 GHz
• 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 5 GHz
• 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 2.4 GHz
• SU-MIMO, UL and DL MU-MIMO support 
• Maximal ratio combining (MRC) & beamforming 
• 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax

Note: *40MHz channels are supported only in 5 & 6 GHz bands.

• Up to 1024-QAM on all three – 2.4 GHz, 5 GHz, and 6 GHz bands 
• Packet aggregation

• Power over Ethernet: 42.5 – 57V (PoE+ and 802.3bt compliant)
• Alternative 54V DC input via DC adapter
• Power consumption: 30W to 40W (802.3bt)
• Minimum power requirement: 30W (PoE+, USB is disabled)
• Maximum power consumption: 40W
• Power over Ethernet injector and DC adapter sold separately.

Note: Actual power consumption may vary depending on the AP usage.

• Two 1000/2.5G/5G BASE-T Ethernet (RJ45)
• One DC power connector (5.5 mm x 2.5 mm, center positive)

• All standard mounting hardware included (AIR-AP-BRACKET-2)
• Desktop, ceiling, and wall mount capable 
• Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes 

• Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
• Kensington lock
• Concealed mount plate with anti-tamper cable bay

• Operating temperature: 32 °F – 104 °F (0 °C – 40 °C) 
• Humidity: 5% to 95% non-condensing

• Mean time between failure (MTBF): 998,440 hrs at +25° C operating temperature  

• 260 mm x 260 mm x 56 mm, including desk-mount feet or mount plate 
• Weight: 1.7 kg

• Integrated layer 7 firewall with mobile device policy management 
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal 
• Flexible guest access with device isolation 
• VLAN tagging (802.1q) and tunneling with IPsec VPN 
• PCI compliance reporting 
• WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal*, WPA3 – Enterprise*, WPA3 – Enhanced Open (OWE)*
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM 
• TKIP and AES encryption 
• Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration 
• Cisco ISE integration for guest access and BYOD posturing

• Advanced power save (U-APSD) 
• WMM access categories with DSCP and 802.1p support 
• Layer 7 application traffic identification and shaping 

• PMK, OKC, and 802.11r for fast layer 2 roaming 
• Distributed or centralized layer 3 roaming

• Embedded location analytics reporting and device tracking 
• Global layer 7 traffic analytics reporting per network, per device, and per application

• One power/booting/firmware upgrade status 

• RoHS
• For additional country-specific regulatory information, please contact Meraki sales

• Indoor access point
• Lifetime hardware warranty with advanced replacement included

• MR57-HW: Meraki MR57 cloud-managed 802.11a-compatible AP 
• MA-PWR-50WAC: Meraki AC adapter for MR series 
• MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)

Note: Power cord  – MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector

• Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2
• Meraki access point license required.