Cisco Meraki MR46E

SKU: MR46E | Hãng: MERAKI | Stock: Còn hàng

Wi-Fi 6 with multigigabit Ethernet and external antennas – Performance and efficiency for indoor environments with auto-detectable external antennas.

Four radios: 2.4 GHz, 5 GHz, dual-band WIDS/WIPS, and Bluetooth® Low Energy
4-stream UL/DL MU-MIMO 802.11ax, up to 3.55 Gbps dual aggregate frame rate
Six external RP-TNC antenna connectors
One 2.5 Gbps multigigabit Ethernet port
PoE: 802.3at

RF optimization	Dual-concurrent radios with MU-MIMO support Radios optimized for rate-vs.-range performance Third radio dedicated to security and RF management Built-in real-time RF spectrum view; cloud-based automatic RF optimization
Layer 7 traffic shaping	Create per-application bandwidth limits Prioritize productivity apps Restrict or block recreational traffic
Cloud managed	Network-wide visibility and control Integrated analytics, reporting, and anomaly detection across networks Self-provisioning for rapid deployment Redundancy and security built into cloud architecture
Location analytics	Measure visitor capture rate, visit length, and repeat visit rate Real-time and historical AP event data across radios Global layer 7 traffic analytics reporting per device, network, and app
Enterprise security	802.1X and native Active Directory integration Air Marshal: real-time WIPS with forensics Built-in antivirus scan (NAC) Built-in Umbrella DNS security*
Accessory information	MA-INJ-5-US: Multigigabit 802.3bt PoE injector MA-INJ-6: Multigigabit 802.3bt PoE injector MA-MNT-CLG-1: T-rail mount kit MA-MNT-MR-18: Mounting kit for MR46E MA-UMNT-MR-A2: Cisco universal mounting adapter MA-UMNT-MR-A3: Aruba universal mounting adapter

Specifications

Category	Specifications
Radios	2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all four radios Supported frequency bands (country-specific restrictions apply): 2.401 – 2.484 GHz 5.150 – 5.250 GHz (UNII-1) 5.250 – 5.350 GHZ (UNII-2A) 5.490 – 5.730 GHz (UNII-2C) 5.735 -5.825 GHz (UNII-3)
Antenna	List of compatible antennas: MA-ANT-3-A6/B6/C6/D6/E6/F6 Individual antenna elements for each radio
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities	DL-OFDMA, UL-OFDMA, TWT support, BSS Coloring 4 x 4 multiple input, multiple output (MIMO) with four spatial streams SU-MIMO, UL MU-MIMO** and DL MU-MIMO support Maximal ratio combining (MRC) & beamforming 20 and 40 MHz* channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) Note: *40MHz channels are supported only in the 5GHz band. Up to 1024-QAM on both 2.4 GHz & 5 GHz bands Packet aggregation
Power	Power over Ethernet: 42.5 – 57 V (802.3at compatible) Alternative: 12 V DC input Power consumption: 30W max (802.3at) Power over Ethernet injector and DC adapter sold separately Note: Actual power consumption may vary depending on the AP usage.
Interfaces	1x 100/1000/2.5G BASE-T Ethernet (RJ45) 1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mounting	All standard mounting hardware included Desktop, ceiling, and wall mount capable Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security	Two security screw options (included) (10 mm long and 2.5 mm diameter and 4.7 mm head) Kensington lock hard point Concealed mount plate with anti-tamper cable bay
Environment	Operating temperature: 32 °F to 122 °F (0 °C to 50 °C) Humidity: 5 to 95% non-condensing
Reliability	Mean Time Between Failure (MTBF): 1,328,360hrs at +25°C operating temperature
Physical Dimensions	12.05” x 6.15” x 1.39” (30.6 cm x 15.62 cm x 3.54 cm), not including desk mount feet or mount plate Weight: 29.98 oz (850 g)
Security	Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE) EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP and AES encryption Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service	Advanced Power Save (U-APSD) WMM Access Categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping
Mobility	PMK, OKC, & 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming
Analytics	Embedded location analytics reporting and device tracking Global L7 traffic analytics reporting per network, per device, & per application
LED Indicators	1 power/booting/firmware upgrade status
Regulatory	RoHS For additional country-specific regulatory information, please contact Meraki sales
Warranty	Indoor access point Lifetime hardware warranty with advanced replacement included
Ordering Information	MR46E-HW: Meraki MR46E Cloud Managed 802.11ax AP MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU) MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included) MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included) MA-ANT-3-A6: Meraki Dipole Antenna (3.8/5.5 dBi) MA-ANT-3-B6: Meraki Dipole Antenna (3/5.7 dBi) MA-ANT-3-C6: Meraki Panel Omni Antenna MA-ANT-3-D6: Meraki Downtilt Panel Omni Antenna MA-ANT-3-E6: Meraki Wide Patch Antenna MA-ANT-3-F6: Meraki Narrow Patch Antenna Note: Meraki access point license required.

** software features can be enabled via firmware updates

Đánh giá

Chưa có đánh giá nào.

Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.

Cisco Meraki MR46E

Đánh giá

Sản phẩm tương tự

Đăng nhập