Cisco Meraki CW9166

Thương hiệu: MERAKI | Tình trạng: Còn hàng

Cloud-managed Wi-Fi 6E? Yes, please – Meet the high-density, high-performance Catalyst wireless 9166 access point.

Four 4:4 MU-MIMO 802.11ax, up to 7.8 Gbps tri-radio aggregate frame rate
4 GHz, 5 GHz, and 6 Ghz radios; dual-band scanning radio; Bluetooth® Low Energy/IoT radio
Full-time Wi-Fi location tracking
PoE: 802.3at and .3bt compliant
USB 2.0 connector

RF optimization	Tri-band radios with MU-MIMO support Radios optimized for rate-vs.-range performance Fourth radio dedicated to security and RF management Built-in real-time RF spectrum view; cloud-based automatic RF optimization
Layer 7 traffic shaping	Classify hundreds of applications Create per-application bandwidth limits Prioritize productivity apps Restrict or block recreational traffic
Cloud management	Network-wide visibility and control Self-provisioning for rapid deployment Automatic reporting Seamless firmware updates
Presence location analytics	Measure visitor capture rate, visit length, and repeat visit rate Measure visitor trends over time and compare performance across locations
Enterprise security	802.1X and native Active Directory integration Air Marshal: real-time WIPS with forensics Built-in Umbrella DNS security
Accessory information	MA-INJ-6: Multigigabit 802.3bt PoE injector

Specifications

Category	Specifications
Radios	2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 6 GHz 802.11ax client access radio 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios
Antenna	CW9166I 2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth 5 GHz: (XOR) Peak gain 5 dBi, internal antenna, omnidirectional in azimuth 6 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth CW9166D1 2.4 GHz: Peak gain 6 dBi, directional antenna, (70×70) 5 GHz: Peak gain 6 dBi, directional antenna, (70×70) 5 GHz (XOR): Peak gain 8 dBi, directional antenna, (60×60) 6 GHz: Peak gain 8 dBi, directional antenna, (60×60)
802.11 ax compatible, 802.11ac Wave 2 and 802.11n Capabilities	UL/DL-OFDMA Target Wait Time (TWT) BSS coloring* SU-MIMO and DL MU-MIMO support Maximal ratio combining (MRC) 802.11ax beamforming 20 and 40 MHz* channels (802.11n) 20, 40, 80 MHz channels (802.11ac Wave 2) 20, 40, 80 and 160MHz channels (802.11ax) Note: *40MHz channels are supported only in 5 & 6 GHz bands. Up to 1024-QAM on 2.4 GHz, 5 GHz and 6 GHz bands Packet aggregation – A-MPDU (transmit and receive), A-MSDU (transmit and receive)
Power	Power over Ethernet: 42.5 – 57 V (PoE+ and UPoE compliant) DC Power Adapter (54V) Power requirement USB: Up to 30.5W (UPOE) Power requirement No USB: Up to 25W (PoE+) Power over Ethernet injector and DC adapter sold separately Actual power consumption may vary depending on the AP usage

CW9166I

Power Source	2.4 GHz radio	5 GHz radio	6 GHz radio	Link speed	USB	Maximum PoE Power consumption
802.3bt (UPOE)	4×4	4×4	4×4	5Gbps	Y (4.5W)	30.5W
802.3at (PoE+)	4×4	4×4	4×4	5Gbps	N	25 W
802.3af (PoE)	–	–	–	–	–	–
DC Power	4×4	4×4	4×4	5Gbps	Y

CW9166D1

Power Source	2.4 GHz radio	5 GHz radio	6 GHz radio	Link speed	USB	Maximum PoE Power consumption
802.3bt (UPOE)	4×4	4×4	4×4	5Gbps	Y (4.5W)	30.5W
802.3at (PoE+)	4×4	4×4	4×4	5Gbps	N	25 W
802.3af (PoE)	–	–	–	–	–	–
DC Power	4×4	4×4	4×4	5Gbps	Y

It is recommended that you ensure that LLDP is enabled to allow proper power negotiation

802.3af PoE is not supported

Interfaces	1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45) 1x DC power connector (8 mm, center positive) USB 2.0 at 4.5W Console – Only available in DNA Mode Environmental Interfaces – Only available in DNA Mode
Mounting	All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included) Articulating Arm (CW-MNT-ART2-00 optional) Desktop, ceiling, wall, and pole mount capable Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes
Physical security	Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head) Kensington lock
Environment	CW9166I Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m) Operating temperature: 32° to 122°F (0° to 50°C) Operating humidity: 10% to 90% (non-condensing) Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m) CW9166D1 Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) Operating temperature: -4° to 122°F (-20° to 50°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)
Reliability	Mean Time Between Failure (MTBF): 1,128,980 hrs at 77°F (25°C) operating temperature 289,596 hrs at 122°F (50°C) operating temperature
Physical Dimensions	CW9166I 9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm) Weight: 3.54 lb. (1.60 kg) CW9166D1 9.5 x 9.5 x 2.28 in (241.3 x 241.3 x 57.9 mm) Weight: 3.50 lb (1.59 kg)
Security	Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WPA2-PSK, WPA2-Enterprise, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE) EAP Local authentication – EAP-TTLS/PAP, PEAP-GTC, EAP-TLS Advanced Encryption Standard (AES) Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service	Advanced Power Save (U-APSD) WMM Access Categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping
Mobility	PMK, OKC, & 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming
Analytics	Embedded location analytics reporting and device tracking Global L7 traffic analytics reporting per network, per device, & per application
LED Indicators	One power/booting/firmware upgrade status
Regulatory	RoHS For additional country-specific regulatory information, please contact Meraki sales
Warranty	Indoor access point Lifetime hardware warranty with advanced replacement included
Ordering Information	CW9166I-MR: Meraki CW9166I Cloud Managed Omnidirectional 802.11ax Compatible AP CW9166D1-MR: Meraki CW9166I Cloud Managed Directional 802.11ax Compatible AP MA-PWR-50WAC: Meraki AC Adapter for MR Series (power cable separate SKU) MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU) Cisco AIR-PWRINJ-6 802.3at Cisco AIR-PWRINJ-7 802.3bt Power cord – MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector Mounting bracket: CW9166I: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled) CW9166ID1: AIR-AP-BRACKET-2(bundled) Articulating Arm: CW-MNT-ART2-00 Meraki access point license required

Software features can be enabled via firmware updates

Đánh giá

Chưa có đánh giá nào.

Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.

Giỏ hàng

Cisco Meraki CW9166

Đánh giá

Sản phẩm tương tự

Đăng nhập