Cisco Meraki MR76

SKU: MR76 | Hãng: MERAKI | Stock: Còn hàng

Outdoor and industrial Wi-Fi 6 – External antennas, integrated and dedicated security, Bluetooth® radios.

IP67-rated: tested for dust, shock, vibration, and moisture
Four radios: 2.4 GHz, 5 GHz, dual-band WIDS/WIPS, and Bluetooth® Low Energy
2-stream UL/DL MU-MIMO
11ax up to 1.7 Gbps dual aggregate frame rate
One Gigabit Ethernet port, 802.3af PoE compatible

RF optimization	Cloud-based RF planning Built-in spectrum analysis Dual-concurrent radios with band steering
Cloud management	Network-wide visibility and control Self-provisioning for rapid deployment Automatic reporting Seamless firmware updates
Mesh	Self-configuring, self-optimizing mesh High-performance multi-radio routing protocols Extends coverage to hard-to-wire areas Self-heals after cable or switch failures
Enterprise security	802.1X and native Active Directory integration Air Marshal: real-time WIPS with forensics Built-in antivirus scan (NAC) Built-in Umbrella DNS security*
Location analytics	Measure visitor capture rate, visit length, and repeat visit rate Measure visitor trends over time and compare performance across locations Enable location services through integrated iBeacon functionality
Accessory information	MA-INJ-6: Multigigabit 802.3bt PoE injector

Specifications

Category	Specifications
Radios	2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all four radios Supported frequency bands (country-specific restrictions apply) Supported frequency bands (country-specific restrictions apply): 2.412-2.484 GHz 5.150-5.250 GHz (UNII-1) 5.250-5.350 GHZ (UNII-2) 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 5.725 -5.825 GHz (UNII-3)
Antenna	List of compatible antennas: MA-ANT-20/21/23/25/27 Antenna are not included, please see “Ordering Information”
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities	DL-OFDMA, UL-OFDMA, TWT support, BSS Coloring 2 x 2 multiple input, multiple output (MIMO) with two spatial streams SU-MIMO, UL MU-MIMO** and DL MU-MIMO support Maximal ratio combining (MRC) & beamforming 20 and 40 MHz* channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) Note: *40MHz channels are supported only in the 5GHz band. Up to 1024-QAM on both 2.4 GHz & 5 GHz bands Packet aggregation
Power	Power over Ethernet: 802.3af protocol compatible Power consumption: 15W max (802.3af) Power over Ethernet injector sold separately Note: Actual power consumption may vary depending on the AP usage.
Interfaces	1x 10/100/1000 BASE-T Ethernet (RJ45)
Mounting	All standard mounting hardware included Mounts to walls and vertical poles.
Physical Security	Two security screws Concealed mount plate with anti-tamper cable bay
Environment	Operating and storage temperature: -40 °F to 131 °F (-40 °C to 55 °C) Operating and storage humidity: 5 to 95% non-condensing Operating and storage altitude: Up to 40,000 feet (12,192 meters) IP67 Environmental rating
Reliability	Mean Time Between Failure (MTBF): 1,315,612hrs at +25°C operating temperature
Physical Dimensions	11.81” x 6.02” x 2.16” (30.0 cm X 15.3 cm X 5.5 cm), not including cable gland, mounts and antennas Weight: 1.34 kg
Security	Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE) EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP and AES encryption Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service	Advanced Power Save (U-APSD) WMM Access Categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping
Mobility	PMK, OKC, & 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming
Analytics	Embedded location analytics reporting and device tracking Global L7 traffic analytics reporting per network, per device, & per application
LED Indicators	1 power/booting/firmware upgrade status
Regulatory	RoHS For additional country-specific regulatory information, please contact Meraki sales
Warranty	Outdoor access point 1 year hardware warranty with advanced replacement included
Ordering Information	MR76-HW: Meraki MR76 Cloud Managed 802.11ax AP MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included) MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included) MA-ANT-20 Meraki Dual-Band Omni Antennas MA-ANT-21 Meraki 5 GHz Sector Antenna MA-ANT-23 Meraki 2.4 GHz Sector Antenna MA-ANT-25 Meraki Dual-Band Patch Antenna MA-ANT-27 Meraki Dual-Band Sector Antenna

** software features can be enabled via firmware updates

Đánh giá

Chưa có đánh giá nào.

Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.

Cisco Meraki MR76

Đánh giá

Sản phẩm tương tự

Đăng nhập