Cisco Meraki MR46

Thương hiệu: MERAKI | Tình trạng: Còn hàng

Wi-Fi 6 with multigigabit Ethernet – Performance and efficiency for indoor environments with a dedicated security radio.

Four radios: 2.4 GHz, 5 Ghz, dual-band embedded WIDS/WIPS, and Bluetooth® Low Energy
4-stream UL/DL MU-MIMO 802.11ax
One 2.5 Gbps multigigabit Ethernet port
PoE: 802.3at

RF optimization	Dual-concurrent radios with MU-MIMO support Radios optimized for rate-vs.-range performance Third radio dedicated to security and RF management Cloud-based automatic RF optimization
Layer 7 traffic shaping	Classify hundreds of applications Create per-application bandwidth limits Prioritize productivity apps Restrict or block recreational traffic
Cloud management	Network-wide visibility and control Self-provisioning for rapid deployment Automatic reporting Seamless firmware updates
Presence location analytics	Track visitor capture rate, visit length, and repeat visit rate Measure visitor trends over time Compare site-to-site performance across locations
Enterprise security	802.1X and native Active Directory integration Air Marshal: real-time WIPS with forensics Stateful firewall for layer 3-7 Built-in Umbrella DNS security with Advanced License
Accessory information	MA-INJ-6: Multigigabit 802.3bt PoE injector MA-MNT-CLG-1: T-rail mount kit MA-MNT-MR-15: Mounting kit for MR44, MR45, MR46 MA-PWR-30W-US: AC adapter for MR APs

Specifications

Category	Specifications
Radios	2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and scanning support Concurrent operation of all four radios Supported frequency bands (country-specific restrictions apply): 2.401 – 2.484 GHz 5.150 – 5.250 GHz (UNII-1) 5.250 – 5.350 GHZ (UNII-2A) 5.490 – 5.730 GHz (UNII-2C) 5.735 -5.825 GHz (UNII-3)
Antenna	Internal antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities	DL-OFDMA, UL-OFDMA, TWT support, BSS coloring 4 x 4 multiple input, multiple output (MIMO) with four spatial streams SU-MIMO, UL MU-MIMO*, and DL MU-MIMO support Maximal ratio combining (MRC) & beamforming 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) Note: 40MHz channels are supported only in the 5GHz band. Up to 1024-QAM on both 2.4 GHz and 5 GHz bands Packet aggregation * Feature is automatically enabled via firmware update to MR 27+
Power	Power over Ethernet: 42.5 – 57 V (802.3at compliant) Alternative: 12 V DC input Power consumption: 30W max (802.3at required) Power over Ethernet injector and DC adapter sold separately Note: Actual power consumption may vary depending on the AP usage.
Interfaces	1x 100/1,000/2.5G BASE-T Ethernet (RJ45) 1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mounting	All standard mounting hardware included Desktop, ceiling, and wall mount capable Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security	Two security screw options (included) (13.5 mm long, 2.5 mm diameter, 5 mm head) Kensington lock hard point Concealed mount plate with anti-tamper cable bay
Environment	Operating altitude: Up to 40,000 feet (12,192 meters) Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) Humidity: 5% to 95% non-condensing
Reliability	Mean time between failure (MTBF): 1,406,652 hrs at +25°C operating temperature
Physical Dimensions	12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.43 cm), not including desk mount feet or mount plate Weight: 28.22 oz (800 g)
Security	Integrated layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)** EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP and AES encryption Enterprise mobility management (EMM) and Mobile device management (MDM) integration Cisco ISE integration for guest access and BYOD posturing * Feature can be enabled by contacting support Feature supported on firmware MR 27+ and can be made available on MR 26; see the WPA3 article for more information * Feature will be made available via a future software update
Quality of Service	Advanced power save (U-APSD) WMM access categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping
Mobility	PMK, OKC, and 802.11r for fast layer 2 roaming Distributed or centralized layer 3 roaming
Analytics	Embedded location analytics reporting and device tracking Global layer 7 traffic analytics reporting per network, per device, and per application
LED Indicators	1 power/booting/firmware upgrade status
Regulatory	RoHS For additional country-specific regulatory information, please contact Meraki sales
Warranty	Indoor access point Lifetime hardware warranty with advanced replacement included
Ordering Information	MR46-HW: Meraki MR46 cloud managed 802.11ax AP MA-PWR-30W-XX: Meraki AC adapter for MR series (XX = US/EU/UK/AU) MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included) MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included) Note: Meraki access point license required

Đánh giá

Chưa có đánh giá nào.

Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.

Giỏ hàng

Cisco Meraki MR46

Đánh giá

Sản phẩm tương tự

Đăng nhập